Production of finely ground natural graphite particles with high electrical conductivity by controlling the grinding atmosphere

Natural graphite particles with high crystallinity sieved to obtain a particle size range of under 63 μm were ground with a ball mill, under various well-controlled grinding atmospheres such as N₂, O₂, He, H₂, and vacuum. The ratio, X_dif50/X_st50, i.e. between the 50 wt.% Stokes diameter and the 50 wt.% laser diffraction diameter, of the ground particles, was used as an index of the flakiness of the particles. The specific resistance of films composed of the ground graphite particles was systematically measured. The rate of reduction in the size of the particles by grinding was slow under an O₂-rich atmosphere such as 100% O₂ and dry air. On the other hand, it was relatively fast in vacuum, or under an N₂ or He atmosphere, and a gas mixture of 99% N₂ and 1% O₂. The rate of size reduction by grinding under a H₂ atmosphere was intermediate. In our experimental conditions, the flakiness of the ground particles increased with the decrease in the particles’ sizes. The electrical conductivity of the ground particles, however, tended to decrease with the decrease in their sizes. Under the condition that the Stokes diameter of the ground particles remains constant, the electrical conductivity of films made from the ground particles increases with the increase in the flakiness of the particles. It was finally determined from our systematic grinding experiments that small flaky particles, which had a size, X_st of ∼1 μm, with a high electrical conductivity can be produced by grinding in a gas mixture of 99% N₂ and 1% O₂. In this case, the flaky shape of the ground particles was visually confirmed by scanning electron microscopy.     

Uniformly Porous Composites with 3-D Network Structure (UPC-3D) for High-Temperature Filter Applications

Uniformly porous composites with 3-D network structure (UPC-3D) have been recently developed via a pyrolytic reactive sintering process, which takes advantage of the evolved CO₂ gas from a decomposing carbonate source (e.g., dolomite, CaMg(CO₃)₂) and does not require any additional pore-forming agent nor long-time burning-out process. Through liquid formation via LiF doping, strong necks are formed between constituent particles before completion of the pyrolysis of carbonate, resulting in the formation of a strong 3-D network structure. The pore size distribution is very narrow (with typical pore size: ∼1 μm), and the porosity was controllable (∼30–60%) by changing the sintering temperature. This article presents the development details of UPC-3D, and reports the recent findings in CaZrO₃/MgAl₂O₄ system, which will be one of the more promising systems for practical applications.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Development of fault cause estimation method for distribution line

We are planning to develop the new Advanced Distribution Automation System (ADAS) equipped with optical communication network and sectionalizer with sensor for more grid reliability and efficiency on maintenance operation. The new system is featured with the function of fault cause or damaged part estimation. The new sectionalizer captures the waveform of electrical line surge originated by fault and the system analyzes the waveform for this function. This paper mainly introduces the system configuration of ADAS and an early stage examination of fault cause estimation technology.     

Study on high performance ice slurry formed by cooling emulsion in ice storage (discussion on adaptability of emulsion to thermal storage material)

This study focuses on an emulsion as a new thermal storage material for ice storage. Two types of emulsions were formed using an oil–water mixture with a small amount of additive. A silicone, light and lump oils were used. The water contents of the emulsions were 70, 80 and 90%. The additive was an amino group modified silicone oil. No depression of freezing point was observed for the emulsions because of their hydrophobic properties. In order to determine the structure of the emulsions, their electrical resistances were measured. Moreover, components of the liquids separating from the emulsions were analyzed. The results indicated that one emulsion was a W/O type emulsion, while the other was an O/W type. Finally, adaptability of the two emulsions to ice storage was discussed, it was concluded that a high performance ice slurry could be formed by the W/O type emulsion.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

Scanning probe microscopy installed with nanotube probes and nanotube tweezers

We have developed well-controlled processes for the growth and manipulation of carbon nanotubes. The relatively thin multiwalled nanotubes were prepared with high purity by arc discharge with a high gas temperature. In the manipulation of nanotubes, the first crucial process is to prepare a nanotube array, so-called nanotube cartridge. We have found the alternated current electrophoresis of nanotubes by which nanotubes are aligned at the knife-edge of a disposal razor. The second important process is to transfer a nanotube from the nanotube cartridge onto a substrate in a scanning electron microscope. Using this method, we have developed nanotube probes and nanotube tweezers that operate in a scanning probe microscope (SPM). The nanotube probes have been applied for observation of biological samples and industrial samples to clarify their advantages. The nanotube tweezers have been demonstrated for their motion in scanning electron microscope and operated to carry a nanomaterial in a SPM.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.